M20x1,5 / 3,0-6,0mm / TL=10,0mm / SW=27/27

Cable glands for RJ 45 cables

UL

E199260_VOL.1_SEC.4 | UL514B CSA22.2 No 18.3-12 CSA22.2 No 94.2-15 UL50E

GOST

GOST |

• For standard industrial applications using data cables with pre-assembled RJ 45 connectors.
• Easy assembly:1- feed connector through cable gland 2- assemble splitted seal around cable
3- insert seal into gland body 4- install cable gland 5- tighten cap.
• High quality strain relief and sealing, reliable performance for standard industrial applications.

Products specifications

Material	Body , Cap	PA 6 (Polyamide 6)
	Seal	CR ( Chloroprene )
Ingress Protection Rating		IP 68 - 5 Bar, 30 min
UL Environmental Rating		TYPE 1, 4X acc. to UL 50E
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +80 °C	-30 °C to +150 °C
Thread Type
		Metric EN 60423
		PG DIN 40430
		Other thread types also available upon request.
Cable Type		Non armoured, with pre-assembled RJ 45 connector.
Accessories		Lock nuts
		Dome plugs
		Gaskets ( Washers )
Remarks		In compliance with DIN EN 62444.
		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Accessories must be ordered separately.
Outer	Thread Size (Male)	M20x1,5
	Thread Length (TL)	10,0 mm
	Ø (D)	30,9 mm
Clamping Range Outer Sheath Ø min - max		3,0 - 6,0 mm
Spanner Width	Cap	27 mm
	Body	27 mm
max. Height (H)		31,9 mm
Part Number	RAL 7035 light grey	BMRJ-13
	RAL 7001 grey	BMRJ-03
	RAL 9005 black	BMRJ-23

M20x1,5 / 3,0-6,0mm / TL=10,0mm / SW=27/27

Lock Nuts

Dome Plugs

Gaskets