PG 9 / 4,0-7,0mm / TL=8,0mm

Cable glands with integrated ventilation

CSA

cCSAus_1945462 | CSA C22.2

UL and Type 4X

E199260 | UL514B, CSA22.2 No 18.3-12, CSA22.2 No 94.2-15

UL50E

GOST

GOST |

• Balances pressure differences between inner housing and the outside environment.
• Prevents damages according to pressure differences.
• Prevents the formation of water condensation in tightly-sealed standard housings.
• Advantages of cable gland and pressure balance element combined in one product.
• Properties of the ventilation membrane stay the same independent of cable diameter and torque.
• Membrane properties: hydrophobic, oleophobic.
• Easy assembly: install cable gland - insert cable - tighten cap.
• High quality strain relief and sealing reliable performance for standard industrial applications.
• Up-to-date international approvals.

Products specifications

Material	Body , Cap	PA 6 (Polyamide 6)
	Seal	CR ( Chloroprene )
	Vent. Membran	PTFE
	Gasket	NBR
Ingress Protection Rating
		IP 66
		IP 67
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-30 °C to +150 °C
Cable Type		Non Armoured
Thread Type
		Metric EN 60423
		PG DIN 40430
		Other thread types also available upon request.
Accessories		Lock nuts
		Dome plugs
Remarks		Manufactured according to DIN EN 62444/50262.
		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Accessories must be ordered separately.
		Some approvals do not cover all colours or sizes.
Outer	Thread Size (Male)	PG 9
	Thread Length (TL)	8,0 mm
	Ø (D)	21,7 mm
Clamping Range Outer Sheath Ø min - max		4,0 - 7,0 mm
Average Air Flow for ΔP = 70 mbar/1 psi (l/h)		25
Water Intrusion		0,1 bar
Spanner Width	Cap	19 mm
	Body	19 mm
max. Height (H)		28,3 mm
Part Number	RAL 7035 light grey	BSVG-12
	RAL 7001 grey	BSVG-02
	RAL 9005 black	BSVG-22

PG 9 / 4,0-7,0mm / TL=8,0mm

Lock Nuts

Dome Plugs