M40x1,5 / TL=18,0mm / F

Ventilation plugs

UL and Type 4X

	E350312 \| CAN/CSA C22.2 No.14-2010

GOST

GOST |

• Balances pressure differences between inner housing and the outside environment.
• Prevents damages according to pressure differences.
• Prevents the formation of water condensation in tightly-sealed standard housings.
• Membrane properties: hydrophobic, oleophobic.

Products specifications

Material	Body , Cap	PA 6 (Polyamide 6)
	Vent. Membran	Acrylic co-polymer on nylon-support
	O-Ring	NBR (standard for A, D and E types)
	Gasket	NBR (standard for B, J and F types)
Ingress Protection Rating
		IP 68 / IP 67 (for water intrusion pressure 0.1 bar)
		IP 69K (only for D types)
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-30 °C to +150 °C
Thread Type
		Metric EN 60423
		without thread
Accessories		Lock nuts
Remarks		Some approvals do not cover all colours or sizes.
Outer	Thread Size (Male)	M40x1,5
	Thread Length (TL)	18,0 mm
	Ø (D)	55,5 mm
Average Air Flow for ΔP = 70 mbar/1 psi (l/h)		375
Water Intrusion Pressure (mbar)		0,5 bar
Spanner Width		- mm
Height (h)		15,5 mm
Design Type		F
Part Number	RAL 7035 light grey	MBVPX-18S
	RAL 7001 grey	MBVPX-08S
	RAL 9005 black	MBVPX-28S

M40x1,5 / TL=18,0mm / F

Lock Nuts

Gaskets